Kis Photobook PRO, Руководство пользователя

Страница: 9 / 21

8 060 677 289 A 10/2006
- User Manual
User Man
ual - Photobook PR
O
060 677 289 A 10/2006 9
User Manual -
User Man
ual - Photobook PR
O
3.2 Realizing a photo book without cover
1. 1. Put the photos in front of you without modifying their order or flipping
them, so that you can see the first one normally (landscape view).
2. Since the 'Photo book product without cover' option has been selected, the
machine initializes. The 'First photo upside down please' instruction displays.
3. Take the first photo and flip it over from the left to the right (as you turn a
page when reading a book).
4. Put the photo in the loading zone (make sure it is well placed against the
limit stop).
5. Lightly push the photo downwards. A detector activates the rollers and the
photo is automatically taken and processed.
6. The 'Finish product' instruction displays on the screen once the photo has
been processed. Do not take it into account until you've finished to insert the
photos and insert then the next photo at the right side. Repeat this operation
as many times as there are photos.
Note: only the first photo must be flipped over, since this one corresponds to the last photo
of the book, the second one to the last photo but one, etc...
Once you have finished you have finished to insert the photos, select 'Finish
product' by hitting the
key.
When the book is finished, the 'Product available' instruction displays on the
screen. Open the cover of the machine, take the photo book out of it, close
the cover and hit the
key to continue.
3.3 Aborting the realization
You can stop the realization of the book at any time. You can use two modes
to abort the realization.
Immediate abort of the realization
Use this abort mode when you realize in time (that means before the process
of the first photo has been completed) that you do not use the appropriate
glue roll or if you notice a dysfunction of the machine. You can then change
the glue format in the glue magazine and, once you have this, restart the rea-
lization of the book.
1. Hit the key. The 'Immediate abort requested" instruction displays on the
screen and the machine freezes (but does not switch off).
2. You can either change the glue rolls (see Changing the glue roll's format in
the
Supplying glue
section), and then continue the book's realization by hitting
the key again, or confirm the immediate abort of the realization by hitting
the key.