Kis Photobook PRO, Руководство пользователя

Страница: 13 / 21

060 677 289 A 10/2006 13
User Manual -
User Man
ual - Photobook PR
O
Supplying glue
The supply of glue, in the form of rolls, is done in the magazine located at
the back of the machine. A specific size of glue roll corresponds to each book
size.
Photobook PRO is delivered with as many cores (recipient rolls for the used
glue strip) as there are roll sizes. When a core is full, use the empty glue roll
as a new one.
1. Loading the glue roll
1. Remove the glue magazine. Since this one is blocked by simple magnets,
just take hold of the handle (located at the back of the machine) and pull it.
2. On the back roll arbor, place the core. Make
sure that the core is well wedged against the
flange (opposite picture).
3. Put the pinion flange with the fixing clip on
the outside on the roll arbor (opposite picture).
Make sure that the flange is well wedged
against the core.
The fixing clip must be put in the ap-
propriate positioning groove (oppo-
site picture).
Note: each roll arbor has as many grooves as there are available album sizes.
4. Put the back roll arbor in its place of the
glue magazine as shown on the opposite
picture (the "naked" part of the roll arbor
must be placed on the left).
Note: a locator on the right of the roll arbor allows
you to correctly place the roll arbor in the magazine
(it is pointed out with the arrow on the opposite
picture).