11
INSTALLATION
INSTALLATION
Attach Magnetic Hold-Down Brackets (Optional)
■
■
Lower the shading, keeping the vanes closed.
■
■
Place the magnetic hold-down brackets onto the bottom rail just inside the end caps, oriented as shown.
■
■
Hold the brackets while opening and closing the vanes. (It may be necessary to have someone assist you.)
Adjust the brackets to the best overall position.
■
■
Mark the screw locations using one of the mounting options shown below.
■
➤
The screw should be placed in the middle of the channel. This will allow for adjustment.
■
■
Drill the screw holes using
3
⁄
32
"
drill bit.
■
■
Attach the hold-down brackets to the mounting surface using the screws provided.
■
■
If necessary, adjust the bracket height by loosening the screw and sliding the bracket up or down.
Hold-Down
Bracket
Bottom
Rail
Outside Mount
Preferred
Alternate
Inside Mount
Preferred
Alternate
Adjust the
bracket
up or down
using the
channel.
