9
INSTALLATION
INSTALLATION
Satellite Battery Pack
Mount the Satellite Battery Pack
■
■
Decide where you want to mount the satellite battery pack. A satellite battery pack may be mounted in any orientation.
■
■
Mark the screw holes for the wall mount bracket.
■
■
Drill the screw holes using a
3
⁄
32
" drill bit.
■
■
Remove the backing from the double-sided tape. Press the bracket into place.
■
■
Attach the bracket using the screws provided.
■
■
Position the battery wand so the power cable is easily connected to the socket.
■
■
Snap the battery wand into the wall mount bracket.
■
■
Install the cover with the slot aligned to the socket in the battery wand.
■
■
Plug the power cable from the shading into the extension cable.
■
■
Plug the other end of the extension cable into the socket in the battery wand.
Proceed to “Unpack the Wand and Attach the Activation Arm” on page 10.
18V DC Power Supply
Connect the Power Supply
■
■
Plug the power cable from the shading into the extension cable.
■
■
Plug the other end of the extension cable into the 18V DC power Supply.
■
■
Plug the 18VDC Power Supply into a standard outlet.
■
■
Secure the extension cable using wire retainers (not supplied). If hiding the cable
behind the shading, make sure it does not impede the operation of the shading.
■
■
Space the wire retainers approximately 15" apart along the power supply cable,
as shown.
WARNING:
Keep the cords and small parts out of reach of children. They
can wrap cords around their necks and
STRANGLE
. They can also put small
parts in their mouths and
CHOKE
.
WARNING:
Electric shock and/or a fire hazard may occur, if not properly
installed.
Proceed to “Unpack the Wand and Attach the Activation Arm” on page 10.
Wall Mount Bracket
Socket
Battery Wand Cover
Slot
Socket
Battery Wand Cover
Extension
Cable
Power Cable
from Shading
Power Cable
from Shading
Extension
Cable
18V DC
Power
Supply
15"
Maximum
Wire Retainers
