3
INSTALLATION
INSTALLATION
Mount the Installation Brackets — Inside Mount
The number of installation brackets required varies depending on the shade width, as shown in the table.
■
Mark 3
1
⁄
2
” in from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s) evenly between the two end
brackets and mark their location. Mount into wood whenever possible.
■
Center the brackets on your marks and mark the screw holes.
➤
The minimum depth required for mounting is 1
5
⁄
8
”. Fully recessed mounting requires 4” for the large
cassette and 3
1
⁄
2
” for the small cassette to be flush with the front of the window opening.
■
For Touch Control with battery wand.
Fully recessed mounting requires 4
5
⁄
8
” for large cassette and
4
1
⁄
8
” for small cassette. Minimum depth required with attached battery wand is 2
1
⁄
4
”.
IMPORTANT:
The front edges of the installation brackets must be level and aligned to each other.
■
Drill the screw holes with a
3
⁄
32
” drill bit.
WARNING:
Product is heavy. Mount into wood/metal studs or into concrete with concrete
anchors. Drywall anchors are not recommended.
■
Use a level to check that the mounting surface is level. Shim the brackets if necessary. Shims are not
provided.
■
Attach the installation brackets using the screws provided.
Proceed to “Install the Shade” on page 5.
Cassette
Installation
Bracket
Headrail End Marks
Window Opening
Space Evenly
Space Evenly
Minimum 15½" For Battery Wand
3½"
3½"
Inside Mount
3½"
Shade
Width
Brackets
Required
Up to 36"
2
36
1
⁄
8
" – 66"
3
66
1
⁄
8
" – 90"
4
