3
INSTALLATION
INSTALLATION
Inside Mounts
For inside mounts the installation brackets may be screwed in place either through the side or through the top holes of each
bracket.
Attach the Brackets
■
For better side mounting, screw through one side and one top hole.
■
For limited surface depths, screw through two diagonal side holes.
■
For top mounting, screw through the two top holes.
Attach Center Support Brackets (if required)
■
Space evenly between the two end brackets.
■
Adjust if necessary to avoid interference with internal headrail parts.
■
Attach with screws through two diagonal holes.
Outside Mounts
For outside mounts, ensure that a 1-
3
⁄
4
" high, flat vertical surface is available for securing the brackets. The brackets will be
screwed through the back holes.
Mark the Bracket Positions
■
Center the headrail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail on the
mounting surface.
➤
Alternatively, measure the width of the headrail and use that width to mark the headrail end points over the window
opening.
■
Then mark
1
⁄
4
" from the headrail marks for the installation brackets.
Attach the Brackets
■
Position the outside edge of the brackets to the outer markings.
■
The bracket tops must be aligned and level to one another.
■
Attach the brackets with screws through two diagonal holes.
Attach Center Support Brackets (if required)
■
Space the center bracket(s) evenly between the two end brackets.
■
Adjust if necessary to avoid interference with headrail mechanisms.
■
Attach with screws through two diagonal holes.
Slat Size
Bracket Depth
Flush to Valance Depth
2"
1-
1
⁄
8
"
3-
1
⁄
2
"
Outside mount bracket
screwed diagonally through
back holes.
Inside mount bracket screwed
through side and top holes.
