2
GETTING STARTED
Thank you for purchasing the Kirsch
®
Basic Faux Wood Collection. This blind has been custom built for you from the highest quality
materials. To avoid errors and save valuable time, please read these instructions before installing your new blind.
Please thoroughly review this instruction booklet and the enclosed packing list before beginning the installation.
Tools You Will Need
■
Pencil or Marker
■
Measuring Tape
■
Flat-Head Screwdriver
■
Phillips Screwdriver
■
Carpenter's Level
■
Power Drill
■
Mounting Fasteners
Parts
All the required installation components are wrapped and packaged with these instructions. Check that the parts you have
correspond to the parts shown below.
NOTE:
Some parts may vary depending upon your chosen mounting options, whether intermediate brackets are required or your
chosen control system options.
■
Installation Brackets
■
Center Support Brackets (blinds over 48" wide)
■
Short or Long Extension Brackets (optional)
■
Adjustable-Magnetic Valance Clips
■
Hold Down Brackets (2 versions, optional)
■
Bracket Shims
■
Installation Screws
Mounting the Brackets
The installation brackets may be used for
INSIDE
,
OUTSIDE
or
CEILING
mounts. The brackets are stamped R.H. (right hand) and
L.H. (left hand) for easy identification.
■
Mounting the brackets level is essential for proper operation of the blind. Shim the brackets if necessary to achieve a level
alignment.
Spacer Blocks
■
Spacer blocks will be attached to the end of each bracket.
■
If installing extension brackets, do not use spacer blocks.
INSTALLATION
Blind Width
Center Support Brackets
12" to 48"
0
48-
1
⁄
8
" to 60"
1
60-
1
⁄
8
" to 120"
2