KIRLOSKAR 8 UP 200/38, Инструкция по установке, эксплуатации и обслуживанию

Страница: 34 / 66

IOM/UP_METRIC Issue Date: 31/12/2007
Page 34 of 66
Last Revision: 12/06/2012
6. MAINTENANCE.
6.1
Maintenance EHS (Environmental Hazard Safety) Instructions
Following hazards may arise during maintenance work.
Fluid Pressure Jet Hazards
Check and ensure that the pump operates at below the maximum Working
Pressure specified.
Hazardous materials:
Wear a suitable mask or respirator when working with chemical material handling
.
Hazardous Gases, Mists, Sprays and Leaks.
Be aware of the hazards relating to the pumped fluid, especially the danger from
inhalation from noxious and toxic gases, skin and eye contact or penetration. Obtain
and understand the hazardous substance data sheets relating to the pumped fluid
and note the recommended emergency and first aid procedures.
Before attempting any maintenance on a pump, particularly if it has been handling
any form of hazardous liquid; ensure that the unit is safe to work on. The pump
must be flushed thoroughly with suitable cleanser to purge away any of the product
left in the pump components. The plant operator should carry this out and a
certificate of cleanliness obtained before starting work. To avoid any risk to health it
is also advisable to wear protective clothing as recommended by the site safety
officer, especially when removing old packing that may be contaminated.