Kirkland Signature 2127649, Инструкция по установке и руководство по эксплуатации и уходу

Страница: 26 / 43

4. Connect the quick connector on the other end of the 3.0 m
/ 10 ft PVC flexible gas supply hose to the rigid Natural
Gas supply pipe
5. Open the manual shutoff valve in the gas supply. The
valve is open when the handle is parallel to the gas pipe.
6. Test all connections using an approved noncorrosive leak-
detection solution. Bubbles will show a leak. Correct any
leak found.
26
5. Reinstall the valve of side burner.
6. Reinstall the side cover and bracket.
7. Reinstall the side panel.
A. Closed valve
B. Open valve
Gas Connection
1. Before making any connections, check to ensure the
Natural Gas inlet pressure falls between the allowable
range of 7" W.C. / 0.25 psi and 14" W.C. / 0.5 psi. If the
NG inlet pressure does not fall within this range, contact
your local gas supplier.
2. A combination of pipe fittings must be used to connect the
grill to the existing gas line.
◼
The 3.0 m / 10 ft PVC flexible gas supply hose design
certified by CSA must be used.
◼
Pipe-joint compounds suitable for use with Natural
Gas must be used. Do not use tape.
◼
There must be a certified manual shut-off valve in the
gas supply line near the grill for easy access.
3. Connect the brass connector on one end of the 3.0 m / 10
ft PVC flexible gas supply hose to the Natural Gas
Pressure Regulator.