5.
Reinsert the burner and reattach using the cotter clip and
screws previously removed. Repeat the procedure for
each main burner.
6.
Position the igniters so they are 3.2 mm / 1/8 in away from
each burner.
24
Change The Top Sear Burner Orifice
1.
Use a screwdriver to remove the two screws from the top
sear burner heat shield. Remove the heat shield.
2.
Use an adjustable wrench to remove the brass elbow.
3.
Use a 6 mm socket wrench or 6 mm nut driver to remove
the orifice. Replace with the corresponding Natural Gas
orifice.
IMPORTANT:
Check that the NG orifice is properly
installed inside the valve.
Содержание 2127649
