Kirkland Signature 2127649, Инструкция по установке и руководство по эксплуатации и уходу

Страница: 23 / 43

Conversion from LP Gas to
Natural Gas
Installation of the regulator
1. Turn off the main gas supply valve.
2. Disconnect 9.07 kg (20lb) propane tank (if present).
3. Turn off all burner control valves.
4. Remove the 9.07 kg (20lb) propane tank (if present) from
the grill cart.
5. Use an adjustable wrench to remove the LP regulator from
the manifold.
6. Use an adjustable wrench to install the Natural Gas
Regulator Hose to the manifold and secure. Attach the
Natural Gas Regulator to the side panel inside the grill cart
with the two screws that are preassembled on the
regulator.
Change Grill Main Burner Valve Orifices
1. Remove the grates and flame tamers.
2. Remove the screws and cotter clip that hold the burner in
place. Set the screw and clip aside.
23
3. Remove the burner from the grill by lifting the burner out.
4. Use a 6 mm socket and wrench or 6 mm nut driver to
remove the LP brass orifice from the end of gas valve. The
main burner NG orifice is located behind the LP orifice, so
no additional orifice needs to be installed.