PAGE 7
Key Control
IMPORTANT - To ensure correct operation of the KIRK
interlock system it is necessary to remove all
loosely or removable held keys before operating the equipment on which the interlocks are mounted.
There should only be enough keys to operate the interlock system sequentially.
The keys removed from the KIRK
interlocks should be returned to Kirk Key Interlock Company,
North Canton
,
Ohio,
or
retained
by
authorized
personnel
for
use
as
spare
keys.
The spare keys must not be normally available to operating personnel, since the use of these keys, where
not specifically required, will result in incorrect operation of the equipment on which the interlocks are
mounted. Any spare keys should be given to operating personnel only, if and when the
corresponding operating key has been destroyed.
ADDITIONAL KEYS will be provided ONLY with proper authorization from the ultimate user to which the
®
specific key combination has been assigned.
®
Duplicate Keys
Each interlock is supplied with a key in its lock. These keys are needed during installation of the
interlocks on equipment. This then provides more keys than are actually necessary for operation of
the interlock system.
When the interlocks have been installed, all extra keys should be removed from the system and
destroyed or retained by authorized personnel. If additional keys are required because of loss or
damage, they can be supplied only on the purchaser’s authorized order. To order additional or
replacement keys, please:
1) Copy the duplicate key release form on pages 9 and 10 of this manual, or print from http://www.kirkkey.com.
2) Complete the form and sign your name.
3) Fax the form to Kirk Key Interlock Company for immediate delivery, at 330-833-1528.
KIRK
A1
KIRK
A1
Instruction Manual for:
Solenoid Key Release Unit and Time Delay Key Release Unit
IB/KRU/06
