PAGE 8
Instruction Manual for:
Solenoid Key Release Unit and Time Delay Key Release Unit
Service and Maintenance
Lubrication
Do not use oil of any type
Kirk Key Interlock Company cannot warranty interlocks that have been oiled.
- Interlocks should be periodically lubricated with a small amount of dry powdered
graphite.
as the oil will collect dirt and "foul" the lock cylinder so that it will
not operate. Apply a small amount of graphite to the key and insert the key into the lock cylinder.
Work the key in and out and turn the key several times in order to distribute the graphite inside the
lock cylinder.
Kirk Key Interlock Company offers a Graphite Lubrication Kit (part number GL-1) complete with
instructions for use. The powdered graphite is supplied in a plastic tube that can be "squeezed" to
force a small amount of graphite into the lock cylinder. As described above, work the key in and out
and turn the key a few times in order to distribute the graphite inside the lock cylinder.
NOTE: Stainless steel dust covers should be utilized to protect the lock cylinders when located
outdoors or in a demanding environment. Dust covers are available separately and can be easily
added to any interlock.
Factory
Service
-
Under
normal
operating
conditions,
KIRK
®
interlocks
should
not
require
any
maintenance
service,
other
than
graphite
lubrication.
However,
if
refurbishment
or
replacement
should
be
required,
contact
Kirk
Key
Interlock
Company,
North Canton
,
Ohio.
All
factory
service
will
be
performed
as
quickly
as
possible
to
minimize
your
down
time.
Any
damaged
or
malfunctioning
interlock
should
be
returned
to
Kirk
Key
Interlock
Company,
North Canton
,
Ohio.
If
this
is
not
possible
and
replacement
locks
are
required,
the
following
information
must
be
forwarded
to
Kirk
Key
Interlock
Company:
KIRK Key Interlock
S.O.
ITEM
ITEM NUMBER
ORDER NUMBER
NORTH CANTON
OHIO,
USA
1-800-438-2442
K I R K
K I R K
1) Lock Number - obtain from the face of lock cylinder.
2) S.O. Number - obtain from nameplate on interlock
3) Item Number - obtain from nameplate on interlock
4) Key Interchange Number (if applicable) - obtain from
LOCK NUMBER
the face of lock cylinder.
KE
Y
N
IN
TER
C
HA
G
E
K
EY
IN
TER
C
HA
N
G
E
IB/KRU/06
