40
41
set by PC software as
switch between conventional mode
and trunking mode
, you can enter conventional mode by
pressing
9
and
.
4) The transceiver can be set to enter conventional channel
automatically when missing the control channel. When the
transceiver is beyond the network coverage, it switches to
conventional mode automatically according to the preset
delay time.
Return to Trunking Mode from Conventional Mode
1) Press Clear button to return to trunking mode in conventional
mode if you have select entering conventional mode by
means of default.
2) If you select entering conventional mode by means of
combination keys, then you can return to trunking mode from
conventional mode in the way set in PC software.
For example, when the combination keys of
9+
are
set by PC software as
switch between conventional mode
and trunking mode
, you can return to trunking mode by
pressing
9
and
.
3) The transceiver can be set by PC software to search control
channel automatically in conventional mode. In conventional
mode, if no signal is received, the transceiver will switch to
trunking mode automatically according to the preset delay
time. While in mode-switching operation, there is a BEEP
warning tone.
CONVENTIONAL MODE
Conventional Channels
1) Press PTT to send transmit and release to receive.
2) Through PC programming the parameters of conventional
mode can be set, such as channel name, RX/TX frequency
and BCL, etc.
3) This transceiver can set 32 conventional channels at most.
4) Select channel by rotate the Rotary Encoder.
5) When transmitting, time display prompts TOT.
6)
Lo
indicates low power transmission.
7) Press
Monitor
button to monitor.
Channel Scan
1) 32 channels can be set through PC programming, and the
parameters on each channel can be set, such as CTCSS/
DCS encoding and decoding, broad band/narrow band,
BCL, high power/low power, voice compander, channel
name, etc.
2) Press
to begin scanning. When scanning, LCD
displays Scanning
.
3) Scan the channel added in scan sequence list only ( and
scan just when there are 2 or more than 2 channels added
in scan list.) Those channels are indicated by
.
4) To add channels to scan sequence, select the channel you
need to add and press
key.
displays indicating
the accomplishment of adding.
5) To delete channels from scan sequence, select the channel
you need to delete and press
key.
disappears
indicating the accomplishment of deleting.
