16
17
Viewing
Viewing the Built-in Status Message
1) If you have selected the function of
viewing the built-in
status message
by PC software, you can press
key
once to enter the mode of viewing the status messages.
a.
Statusxx
will be displayed on LCD.
b. The content of built-in status messages can only been
programmed by PC software. Please contact your local
dealer for detail information.
c. There are up to 32 status messages, and no more than 12
ASCII characters can be stored in each message.
2) Press
and
or rotate the Rotary Encoder to view
the status messages. Press
or rotate clockwise to
increase the status code, and
or counterclockwise to
decrease it.
3) Press Clear button to exit.
Viewing the Received Status Message
1
) If you have selected the function of selecting
data message
stack
by PC software, while in the mode of viewing the
status messages, you can press
key once again to
enter the mode of viewing the received messages. The
message type and content display in two lines.
a. Message type displaying in the first line on LCD is
RecStatus xx
, in which the
xx
is the enquiry number.
b. Message content displaying in the second line consists of
Sending unit
and
Content
.
C. There are two pages of content for each received status
message, one is for
Sending unit
and the other is for
Content
. The
Sending unit
displays the sender's ID
and the
Content
displays built-in status message. Press
key to switch the displayed page between
Sending
unit
and
Content
.
d. There are up to 30 received status messages can be stored
in memory. But all messages will be lost when the
transceiver is switched off.
2) Press
and
or rotate the Rotary Encoder to view
the received status messages.
Press Clear button to erase the received status message
while you view it.
Viewing the Received Data Message
1) If you have selected the function of
data message stack
by PC software, while in the mode of viewing the received
status messages, you can press
key to enter the
mode of viewing the received data messages. The message
type and content display in two lines.
a. Message type displaying in the first line on LCD is
DataMsgxx
, in which the
xx
is the enquiry number.
b. Message content displaying in the second line consists of
Sending unit
and
Content
c. There are two pages of content for each received data
message, one is for
Sending unit
and the other is for
Content
.The
Sending unit
displays the sender's ID
and the
Content
displays built-in data message. Press
key to switch the displayed page between
Sending
