![Kirby Morgan 37SS Скачать руководство пользователя страница 83](http://html1.mh-extra.com/html/kirby-morgan/37ss/37ss_operation-and-maintenance-manual_1971883083.webp)
© ⅯⅯⅩⅢ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 130318002
69
Kirby Morgan
®
37SS
Chapter 6 - SuperFlow® 350 Regulator & Exhaust System Post Dive Cleaning & Sanitizing
Remove the regulator cover to inspect the diaphragm.
2) Remove the nose clearing device by loosening the
packing nut removing the knurled knob and sliding
the shaft out through the oral nasal.
3) Remove the microphone from the oral nasal mask
then remove the oral nasal mask from the helmet.
Remove the microphone so you can remove the oral/nasal
mask.
4) Using small Phillips screwdriver, carefully remove
the two clamps, screws & nuts then pull the whiskers
away from the main exhaust body. Remove the valve
seats and valves. Remove the retaining ring holdin
the water dump components in place, then remove
the valve, seat and sealing o-ring.
The SuperFlow
®
350 Regulator
Regulator Body
Inlet Valve
Valve Seat
Jam Nut
Inlet Nipple
Piston
Spring Set
Spring Set
Spacer
Shaft
Clamp
Cover
Diaphragm
Nut
Gasket
Exhaust Flange
Exhaust Valve
Washer Spacer
Roller Lever
Washer
O-ring
Packing Nut
Adjustment Knob
Retaining Pin