KIRAMI FinVision, Инструкция по эксплуатации

Страница: 9 / 25

9 / 25 INSTRUCTION MANUAL: Kirami FinVision sauna
Ventilation
The ventilation in the sauna room is sufficiently effective and the
fresh incoming air has been directed near the sauna heater in
accordance with the regulations. The opening for incoming air has
been placed into a hatch in the rear wall of the sauna under the
benches. The ventilation during bathing in the sauna works so that the
air exits from under the benches and the sauna door (a large gap).
After bathing, the sauna facilities should be ventilated and allowed to
dry efficiently so that the air can exit from the top of the sauna room
by keeping the front door open for a short period of time, for example.
Installing the sauna
The sauna is delivered as a single element, to which the customer installs the roofing sheets,
the sauna heater and the heater stones according to the instructions. When opening the
sauna package, you should check that all parts have arrived intact. Open the package carefully
using a cordless screwdriver to ensure that the glass will not break. The roofing sheets are
delivered in a separate package attached with screws; please also open it carefully. You can
find the Narvi
®
sauna heaters inside the sauna on the floor of the sauna.
Installing the roof
The roofing sheets are delivered in a separate package attached with screws; please also open it
carefully. Check that all the pieces can be found in the package as stated in the contents of the
delivery. For safety reasons, we recommend that at least two people work together to install the
roof. You can check the parts of the sauna below in the list of the contents of the delivery.
Watch a YouTube video on how to install the roof: https://youtu.be/expi6Yi36hU
Attach the red parts of the roof in the following order:
1. The base of the roof consists of six separate
sheets of plywood. Attach the roofing
plywood (1) first to the ends of the sauna
using terrace screws (5) . The plywood
sheets have places reserved for the screws.
2. Attach the plywood sheets (2) to both
sides of the sauna using (5) terrace screws.