Kiramek Vision 1014C, Инструкция по эксплуатации

Страница: 6 / 40

VISION 1014C INSTRUCTION MANUAL
3
Precautions & Safety
OPERATION . Use of the 1014C outside its intended purpose as described in
this Instruction Manual could result in damage to the vehicle or surround-
ing property, or cause serious injury or even death. Seek professional instal-
lation by an authorized VISION dealer if you feel uncomfortable proceeding
yourself.
SAFETY POINTS TO ABIDE BY :
Never start the vehicle’s engine in enclosed spaces that lack adequate
1.
ventilation. Extended exposure to carbon monoxide exhaust fumes
can result in death!
Do not disconnect the vehicle’s battery, as it could cause serious prob-
2.
lems with airbag systems, anti-theft radios or vehicle diagnostics. If
you absolutely must disconnect the vehicle’s battery, first disconnect
the main power wiring harness of the 1014C and then disconnect the
vehicle’s battery.
Do not proceed with installing this system in vehicles that do not have
3.
a 12-volt electrical system. This system will not function in 24-volt
trucks, and any damage resulting from such installation shall be the
sole responsibility of the installer.
Do not install the 1014C alarm unit or associated sensors in or
4.
near water, or in a location where water could gather. The 1014
alarm unit is weatherproof but not waterproof, and an electrical short
could occur if water gets inside or shorts a contact in the wire har-
ness. Only an optional siren and the 1014C alarm unit can safely be
installed in the engine compartment, not sensors! (Also see page 33.)
Do not install the 1014C alarm unit in an environment of intense con-
5.
densing humidity or steam, in an area with an unusally large number
of airborne particles, or any place where oil could build up inside the
control module case. All of these extreme environments could lead to
an electrical short and possible cause a fire.
Avoid installing the 1014C and its associated sensors near sources
6.
of intense RF transmissions which could possible interfere with the
operation of the system. If you find the system is randomly working
and not working, consider relocating the alarm unit and/or sensors.