Kiramek Vision 1014C, Инструкция по эксплуатации

Страница: 26 / 40

23
When a vehicle sector (i.e., door, ignition, sensor) is triggered 8
times
, the security system will automatically bypass that sector
until you disarm and arm the system again. This feature is use-
ful to prevent noise pollution caused by multiple siren triggers
in a short period of time. Parking near construction sites or having animals
jump on the vehicle can cause such shock sensor triggers to occur, espe-
cially if the sensitivity is set to maximum.
SBS (Sector Bypass System)
DOOR TRIGGER
The siren will blast for 30 seconds whenever a door is opened while the
system is armed (if the door input is connected). Vehicle lights will also
flash, if so installed, during the 30 seconds.
OPERATION
SYSTEM “ARMED” FEATURES
IGNITION TRIGGER
IG PROTECT MODE
(user-programmable, enabled by default)
The siren will blast for 30 seconds when the ignition switch is
turned on while the system is armed. Vehicle lights will flash if
so installed.
REMOTE START COMPATIBILITY MODE
(user-programmable)
When the ignition goes on while the system is armed, the
siren will not go off. Instead, sensor and ignition triggers are
bypassed, while door and trunk triggers remain active.
This feature allows a 3rd party remote starters or turbo timer systems to
run the engine without triggering the 1014 siren. The 1014 is still pro-
tecting the vehicle, so any attempt to open a door will trigger the siren (if
the door input is connected). And when the remote starter or turbo timer
turns off the ignition, the shock sensor and ignition triggers are then re-
activated.