Earth Mark
Ground Terminal
Output Indicator Light (Green)
Overload Indicator Light (Red)
AC Receptacle
In Case of Normal Operation:
Output Indicator Light (Green)
In Case of Overload Operation
of Short-Circuit:
Overload Indicator Light (Red)
4.Switch on the equipment to be used.
in case of overload operation or when trouble occurs for the equipment being used,
the output indicator light(green) will go out, the overload indicator light(red) will light
continuously, and no power will be put out.
At this time, the engine will not stop, so that the engine must be stopped by setting
the respective engine switch to STOP.
CAUTION
When equipment requiring a large starting power, like
a motor etc., is used, the overload indicator light(red)
and the output indicator light(green)may light together
for a short time (about 4 sec),but this is no abnormality.
After start of the equipment, the overload indicator light
(red) will go out and the output indicator light(green)
will stay lit.
CAUTION
2. Start each engine according to "STARTING THE ENGINE".
When the output indicator light(green)does not light and the overload indicator light
(red)lights instead, set the engine switch to STOP, stop the engine at once and then
start the engine again.
3. Confirm that the equipment to be used is switched off, and insert the plug of the
equipment to be used into the AC receptacle of unit A or unit B.
1.Connect the ground terminal.
Confirm that the use equipment to be connected is
switched off.
When the equipment to be used is switched on, it will
operate suddenly, and injuries or accidents may be
caused.
Fuse
Fuse
Fuse
Fuse
Fuse
Fuse
