AC applications
1.Start the engine and make sure the output indicator light(green)comes on.
2.Confirm that the appliance to be used is switched off, and plug in the appliance.
Electrical equipment (including electrical lines and plugs connection) could not
be defective.
The DC receptacle can be used while the AC power is in use. if you use both
at the same time, be sure not to exceed the total power for AC and DC.
NOTE
Overload Indicator
Light (Red)
Output Indicator
Light (Green)
Plug
CAUTION
Be sure that all appliances are in good working order before connecting them
to the generator. If an appliance begins to operate abnormally, becomes
sluggish, or stops suddenly, turn off the generator engine switch immediately.
Then disconnect the appliance, and examine it for signs of malfunction.
3. In order to acquire both the best effect and the maximum service life of the
generator. Usually, the new generator should run 20 hours under 50% load, the
generator may reach the best performance.
Fuel Cap Lever
OFF
3.Turn the cap lever fully counterclockwise to the "OFF" position
Be sure the fuel cap lever, choke and the engine switch are "OFF" when
stopping, transporting and/or storing the generator.
CAUTION
