Fuel Cap Lever
ON
ON
Engine Switch
ON
OFF
5.STARTING THE ENGINE
NOTE
Turn the fuel cap vent lever to the OFF position when transporting generator.
When starting the generator after adding fuel for the first time or after long term
storage, or after running out of fuel, turn the fuel valve lever to the ''ON''
position, then wait for 10 to 20 seconds before starting the engine.
Before starting the engine, disconnect the load from the DC terminals.
NOTE
1.Turn the fuel cap lever fully clockwise to the ON position.
2.Turn the engine switch to the ON position.
Spark Plug Maintenance Cover
Handle Bar
Plug Wrench
Spark Plug Cap
RECOMMENTED SPARK PLUG: WR7DC
3.SPARK PLUG SERVICE
To ensure proper engine operation, the spark plug must be properly gapped and
free of deposits.
1.Remove the spark plug maintenance cover.
2.Remove the spark plug cap.
3.Clean any dirt from around the spark plug base.
4.Use the wrench to remove the spark plug.
