KIP KIP 2300, Руководство пользователя

Страница: 4 / 57

3
WARNING
1. Power source should be rated from 100V - 240V +6/-10%, 6A or
higher, and 50/60Hz.
2. It is preferable that the used power circuit is provided with a dedicated
breaker.
3. Install the machine as close as possible to the outlet.
4. When you wish to move the machine to another place, make sure to
ask your service engineer.
Connect the scanner and Ground with each other surely with the
grounding wire. Otherwise, it is dangerous for you if you receive an electric
shock or at the time of lightning. If the outlet does not have a Grounding
Terminal or if it is impossible to connect, call the vendor or service
professional for the installation.
Do not disassemble or tamper the machine. Otherwise, it may cause a fire
or receiving an electric shock.
1. Do not use a multi-wiring connector that might raise the temperature of
the outlet abnormally and cause a fire.
2. Do not put anything heavy on the power cord. It may cause a fire or
receiving an electric shock.
3. Do not step on the power cord, and do not damage or process it. It
may also cause a fire or receiving an electric shock.
4. Do not tie the power cord or make a knot on it. It may also cause a fire
or receiving an electric shock.
5. Do not put a flower vase, a flowerpot or a water-filled glass on the top
of the machine. If the water spilt out, it may also cause a fire or
receiving an electric shock.
1. If the machine generates abnormal smell or noise, turn it off and then
disconnect the power plug from the outlet necessarily.
2. Do not handle the power plug with the wet hand positively. It may
cause to receive an electric shock.
3. Insert the power plug into the outlet completely. If the power plug is not
inserted completely, it may cause a fire.
4. Use only the attached power cord.
Make sure to catch the Plug when you unplug the machine.
Otherwise, you may break the cord and may result in a fire or receiving an
electric shock.