Kioti RX6030 Скачать руководство пользователя страница 38

Страница: 38 / 252

rX6030 / rX7030 / rX8030

10. part no. : t4930-52481

Avoid flames and sparks.

STOP engine while refueling

ONLY use diesel.

11. part no. : t5210-52311

WARNING

Use the quick-turn function only during a normal

work. Never use the quick-turn function under

the following conditions. It can lead to rollover.

1. Driving at a high speed

2. Driving on a steep slope or sharp turn

3. Plowing at a high speed

4. Work with a loader

The owner has the sole responsibility for any

problem occurred by not following the above

instruction.

1. Make sure to follow the precautions specified

in the operating manual and safety decals.

2. Keep the safety instructions in the operating

manual and safety decals.

3. Never modify the machine without approval.

4. Never use an implement with the capacity

other than the specified.

The owner has the sole responsibility for any

problem occurred by not following the above

instruction.

1. When the vehicle is equipped

with the ROPS, always fasten

your seat belt. When no ROPS

is installed, never wear the seat

belt.

2. When driving the tractor

equipped with the ROPS, make

sure to wear the seat belt. If the

tractor overturns, hold the

steering wheel firmly and never

jump off the vehicle.

T5210-52311

1. Ventilate the cabin periodically when working

in the cabin with the A/C activated for an

extended period of time. Air in the cabin can

become stale.

2. Never sleep in the cabin with the A/C ON.

You can be suffocated to death.

12. part no.: t4125-56181

T4125-56181

TF120(RX6030,7030,8030)-AU-01.in26 26

2015-10-29 오후 6:38:00

Содержание RX6030





























































































































































































































































Результаты поиска

Содержание RX6030

Отзывы:

Похожие инструкции для RX6030

Бренды по названию

Популярные бренды

Kioti RX6030, Руководство пользователя

Результаты поиска

Содержание RX6030

Отзывы:

Похожие инструкции для RX6030

Бренды по названию

Популярные бренды