Kioti RX6030 Скачать руководство пользователя страница 207

Страница: 207 / 252

maintenance

IMPORTANT

To protect the catalyst filter,

keep the followings:

Make sure to use only genuine

fuel.

Keep the engine oil replace

ment schedule.
Check the engine oil level fre-

quently to keep it to the speci

fied level.

Avoid any unnecessary engine

idling.

Never stop the engine during

driving.

Never place the shift lever in

the neutral position when driv

ing downhill.
Do not use any engine oil ad-

ditive or fuel additive.
Avoid driving with any warn-

ing lamp illuminated.

Do not allow any flammable

materials, such as dry grass

and paper, to come near the

catalyst filter while parked.

•
•
•

CAUTION

Never bleed the fuel system

while the engine is hot.

•

IMPORTANT

After bleeding, fuel without air

bubbles is filtered by the fuel

filter and is transferred to the

fuel injection pump. Maintain

the proper fuel level in the fuel

tank before the fuel tank be-

comes empty. If all fuel is com

pletely consumed in a Disel

engine, fuel should be added

to the fuel tank and then the

fuel system should be bled.

•

NOTE

if the engine cannot be started

even after bleeding the fuel sys-

tem, contact your local Dealer.

•

(1) adjusting bolt

(a) adjusting belt tension

(b) pull

ADjUsTINg fAN BElT TENsION (U)

in order to extend the fan belt life-

time, the tension of the belt should be

correctly adjusted. the belt tension

should be inspected regularly accord-

ing to the following procedure:
1. stop the engine and apply the

parking brake.

2. open the hood.
3. apply moderate thumb pressure

to the belt (a) between the crank-

shaft pulley and alternator pulley

to check for tension.

T11O713A

TF120(RX6030,7030,8030)-AU-07.in25 25

2016-06-17 오후 1:55:45

Содержание RX6030





























































































































































































































































Результаты поиска

Содержание RX6030

Отзывы:

Похожие инструкции для RX6030

Бренды по названию

Популярные бренды

Kioti RX6030, Руководство пользователя

Результаты поиска

Содержание RX6030

Отзывы:

Похожие инструкции для RX6030

Бренды по названию

Популярные бренды