Kioti DK65S Скачать руководство пользователя страница 60

Страница: 60 / 111

OPERATION 5-5

C71O505B

5. Set the hand throttle at about half

throttle.

(1) Hand Accelerator Lever

7. Turn the switch key to “Start” position.

8. Release the key as soon as the en-

gine starts. It will return to the ON
position.

9. It is normal for the preheat (glow plug)

indicator to come on after operating
the starter motor for more than 8
seconds.

WARNING

Do not operate the starter motor
continuously for more than 10
seconds.
If the engine does not start; turn
the switch to “OFF”, wait 30
seconds, and repeat the starting
procedure.
Never engage the starter motor be-
fore the engine stops turning.

10. Allow the engine to reach its normal

operating temperature before start-
ing work.

WARNING

Do not turn the key switch to the
START position while the engine
is running.

C71O506B

6. Fully depress the clutch pedal.

WARNING

As a safety feature, the engine will
not start unless the clutch pedal
is fully depressed.

(1) Clutch Pedal

Содержание DK65S
















































































































Результаты поиска

Содержание DK65S

Отзывы:

Похожие инструкции для DK65S

Бренды по названию

Популярные бренды

Kioti DK65S, Руководство пользователя

Результаты поиска

Содержание DK65S

Отзывы:

Похожие инструкции для DK65S

Бренды по названию

Популярные бренды