background image

5-14   DK65S

USING IMPLEMENTS SAFELY

1. Do not allow anyone to stand near the

tractor, or between the tractor and
implement, when attaching or remov-
ing implements.

2. Remove and attach implements on a

firm, level surface. Use proper light-
ing at night.

3. U s e   a p p r o p r i a t e   b a l a n c e   w e i g h t s

when mounting heavy implements.

4. Before making any adjustments to an

implement; turn off the PTO, stop the
engine, and apply the parking brake.
Ensure that all moving parts have
stopped.

5. Always use the drawbar for pulling

and towing. Attaching a load or imple-
ment to any other part of the tractor
may cause damage or upset.

6. When working on slopes, increase the

tread width (open wheels) to improve
stability.

7. The tractor is longer with implements

attached. Use extra care when turn-
ing and be alert for bystanders and
obstacles.

8. Use only approved counterweights to

achieve a safe balance. Never use
people or other objects.

9. When using a front loader, maintain

stability by adding a rear counter-
weight or a rear-mounted implement.

WARNING

Read and understand both the
tractor and implement manuals
before using. Use implements only
for their intended purpose to
avoid equipment damage and
personal injury.

POWER STEERING PRECAUTIONS

1. Power steering functions only when

the engine is running. Steering may be
slightly harder at low engine speed.

2. Turning the steering wheel will be

more difficult when the tractor is not
moving; and it will increase tire wear.

3. The use of front mounted equipment

such as a loader will affect steering
effort. When using front mounted
equipment, adjust the front tire pres-
sure and install the appropriate coun-
t e r w e i g h t   p e r   i n s t r u c t i o n s   i n   t h i s
manual. Steering while the tractor is
in motion is recommended.

4. Avoid turning the steering wheel to its

extreme position. The noise that oc-
curs is the relief valve which is de-
signed to prevent damage to the hy-
draulic system. Other hydraulic func-
tions can be adversely affected by
continuously holding the steering
wheel in the extreme position.

5. In cold weather, allow the system to

warm up so that the steering func-
tions properly.

6. When servicing or repairing the steer-

ing system, take precautions to avoid
oil contamination.

7. Power steering makes the steering

wheel very easy to turn. Be careful at
all times, especially at higher speeds.

8. When adding or changing the oil, use

only the prescribed oil.

Содержание DK65S
















































































































Отзывы: