4.2.4 When the motor is rolling up the plastics, the pipe arrives
at the required position, at this time rotate the knob which
controls the rolling status and make the gear pin touch the
micro switch( with click sound), hold on and fasten the lock
bolt by a cross head screw-driver.
4.2.5 When the motor is rolling down the plastics, the pipe arrives
at the required position, at this time rotate the knob which
controls the rolling status and make the gear pin touch the
micro switch( with click sound) , hold on and fasten the lock
bolt by a cross head screw-driver.
4.2.6 The above steps would set up the motor’s limit range. Turn
on the power and check if the range setup is correct. If it is
not correct, please review the manual carefully and do the
setup again.
5. Maintenance
5.1 Check the bolts on each connection regularly. Replace the
bolts which is deformed or snapped.
5.2 No need to refill the gear oil during the life duration of this
product.
5.3 This product could be used for greenhouse rolling ventilation
and curtaining system. For other usage, please consult our
company first.
6. Common problems and solutions
1
1.Cautions and dangerous.
1.1 Proper using and maintenance will help to extend the life
of film reeler. please operate in accordance with this
instruction Manual.
1.2 Input Voltage of this product is AC220V, Please connect the
wire under guidance of the professional.
1.3 Do not use voltage over AC220V, the maximum voltage
fluctuations should not exceed ±10%. The installation must
be equipped with reliable grounding cable, the grounding
cable and the neutral cable are prohibited to have any
connection with each other.
1.4 Please keep the children far away from the working area,in
case of accident or electrocution
1.5 Please off the power before installing and reparing the product,
in case of electrocution.
1.6 Do not put the product in the water or in the wet environment
for a long time,and if you find the water inside the motor,
please stop using it and return it back to our factory for testing.
1.7 Please do not throw, drag and drop the motor, or make other
dangerous actions, to avoid the impact of the product
。
1.8 When it is thundering, please turn off the power, in case of
damage caused by lightning.
1.9 The customer should keep the working area clean, clear
the snow, leaves , in case of damage of overloading.
1.10 If the connecting wire need to be lengthened, please make
sure that the connecter is safe and reliable, in case of fire
and dangerous.
