3.4.1 Please operate according to the “correct installation”.
3.4.2 Correct installation could guarantee the performance of
the products.
3.4.3 After the installation, the motor should be above the limit
switch at any position of the rolling.
3.4.4 After the installation, the cable should be connect into the
control box, then turn on the power, adjust the limit switch
the proper position, and then fasten the lock bolts.
3.4.5 If there is power failure during the operation of the products,
and you would like to lower down the rolling pipe urgently,
you could hold the pipe first and loosen the connection
between the pipe and the motor, then lower the pipe slowly.
3.5 Installation dimension
Manual operation area
Manual operation illustration
When there is power failure, please take off the cap for the
manual operation, use an electrical drill to operate on the releas
-ing shaft, after the operation, please put the cap on.
