Kingsman IDV26LP, Руководство по установке, Страница: 56 / 72

Log Placement – LOGF35
LOGF35 Log Set and Glowing Embers Parts List
This illustration shows the rear log positioning bracket and 4 pin
locating positions.
Log A has 2 locating holes. Position those 2 holes over the 2 pins
on the left side of the log mounting pan as shown in the picture
above.
Log B has 2 locating holes. Position those 2 holes over the 2 pins
on the right side of the log mounting pan as shown in the picture
above.
Log C has to be lowered into position just behind Logs A and B.
Log C shall be pulled up to Logs A and B as shown in the picture
above.
A bag of Ember Chunks is supplied with the Log set. It is very
important that these chunks are placed onto the front burner and
log mounting pan as shown in the picture. Spread the Ember
Chunks out no more than one layer deep.
NOTE: If you do not
follow these instructions correctly then sooting problems can
occur.
WARNING:
Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
56