Kingsman FDV350, Руководство по установке, Страница: 13 / 49

Fig. 1
Fig. 2
Fig. 3 Fig. 4
Fig. 5 Fig. 6
F35 LOG ASSEMBLY
Fig. 1. Remove can of touchup paint from firebox. Remove logs and bag of glowing embers chunks from carton and inspect.
There are three logs and they are lettered A, B, and C.
Fig. 2. Shows rear log positioning bracket and 4 pin locating positions.
Fig. 3. Log A has 2 locating holes, position the 2 holes on the log over the 2 pins on the left side of the log mounting pan as
shown in the picture.
Fig. 4. Log B has 2 Locating holes, position the 2 holes on the log over the 2 pins on the right side of the log mounting pan
as shown in the picture.
Fig. 5. Log C has to be lowered into position just behind logs A and B. Log C has an area notched out of the rear of it to fit
over rear positioning bracket as shown in the picture.
Fig. 6. A bag of Ember chunks is supplied with the unit, it is very important that these chunks are placed onto the front burner
and log mounting pan as shown in the picture, spread the ember chucks out no more than one Layer deep. NOTE: IF
YOU DO NOT FOLLOW THIS INSTRUCTION CORRECTLY SOOTING PROBLEMS CAN OCCUR.
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
13