Kingsman Fireplaces ZCV3622LP, Руководство по установке

Страница: 42 / 79

Conversion Kit Instructions – PART A
Kit Number Description Pilot Orifice
Burner Orifice
Brass (1000-255)
Brass Nipple Air Shutter Hi/Lo Regulator
3622-CKLP
Propane
Conversion
-Millivolt-
1001-P167SI
#30 (977.167)
#54
1000-P201VE
3/8”
1001-P202SI
(0.907.202)
3622-CKNG
NG Conversion
-Millivolt-
1001-P165SI
#51 (977.165)
#46
1000-P201VE
3/16”
1001-P201SI
(0.907.201)
3622RB-CKLP
Propane
Conversion
-Millivolt-
1001-P167SI
#30
(977.167)
1.25mm 1000-P201VE 5/16”
1001-P202SI
(0.907.202)
3622RB-CKNG
NG Conversion
-Millivolt-
1001-P165SI
#51 (977.165)
#47 1000-P201VE 1/16”
1001-P201SI
(0.907.201)
3622 -CKLPI
Propane
Conversion
-IPI -
1001-P168SI
#35 (977.168)
#54
1000-P201VE
3/8”
1002-P014SI
(0.907.014)
3622 -CKNGI
NG Conversion
- IPI -
1001-P166SI
#62 (977.166)
#46
1000-P201VE
3/16”
1002-P016SI
(0.907.016)
3622RB-CKLPI
Propane
Conversion
-IPI -
1001-P168SI
#35 (977.168)
1.25mm 1000-P201VE 5/16”
1002-P014SI
(0.907.014)
3622RB-CKNGI
NG Conversion
- IPI -
1001-P166SI
#62 (977.166)
#47 1000-P201VE 1/16”
1002-P016SI
(0.907.016)
3622 –CKLP2
Propane
Conversion
-IPI -
1001-P168SI
#35 (977.168)
#54
1000-P201VE
3/8”
1002-P012SI
(907.012)
3622 –CKNG2
NG Conversion
- IPI -
1001-P166SI
#62 (977.166)
#46
1000-P201VE
3/16”
1002-P013SI
(907.013)
3622RB-CKLP2
Propane
Conversion
-IPI -
1001-P168SI
#35 (977.168)
1.25mm 1000-P201VE 5/16”
1002-P012SI
(907.012)
3622RB-CKNG2
NG Conversion
- IPI -
1001-P166SI
#62
(977.166)
#47 1000-P201VE 1/16”
1002-P013SI
(907.013)
Refer to “ Gas Specifications Chart ” for inlet pressures and input ratings. Clock meter to verify input rate. Place conversion label
as close to converted gas control as possible. Refer to lighting instructions to verify the normal operating sequence of the ignition
system. IMPORTANT: Always check for gas leaks with a soap and water solution. DO NOT USE OPEN FLAME FOR LEAK
TESTING.
⚠
-CAUTION-
Before servicing the burner system ensure that the gas supply is turned OFF and disconnect
all electrical connections to the appliance. Allow the appliance to cool to room temperature.
Note that the pilot assembly may be hot in an intermittent or standing-pilot system—even if the
main burner was never on. Exercise caution when working within the area.
-ALL WORK SHOULD BE PERFORMED BY A QUALIFIED AND CERTIFIED TECHNICIAN-
Parts List:

HI/LO Pressure
Regulator Assembly
 Pilot Orifice
 Burner Orifice

Brass Nipple
 Instructions

Conversion Kit Label
42