KINGSLEY–BATE
Fine Garden Furniture
0
ASSEMBLY INSTRUCTIONS FOR THE ST-70
1
*NOTE
A TENON
B MORTISE
HOLE
2
WHEEL ASSEMBLY FRONT LEG
3
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid
marring the wood.
NOTE: During assembly of the furnitu re please match the jo ints with
the corresponding letters or numbers stamped on the furniture.
6
CHAISE FRAME
STEP-II
With a rubber mallet, gently knock FRONT
LEG and the WHEEL ASSEMBLY leg into
their corresponding places.
Please be s ure
to match the numbere d tenons w ith the
corresponding mortise holes.
4
STEP-III
Insert the locking dowels and drive them in
gently.
If you use a hammer be sure to
place the sanding block provided
between the hammer and the leg for the
last few blows.
This will prevent marring of the wood.
Do not force do wels. If dowels
are not completely flush just sand away any excess with the sanding block.
