GR1031-014985 ENG 12 20130926 Ver. 2
WARNING
DO NOT use grill without charcoal ash bowl in place. DO NOT attempt to remove charcoal ash bowl while bowl
contains hot coals.
WARNING
Place the grill outdoors on a hard, level, non-combustible surface away from roof overhang or any combustible
material. Never use on wooden or other surfaces that could burn. Place the grill away from open windows or doors
to prevent smoke from entering your house. In windy weather, place the grill in an outdoor area that is protected
from the wind.
WARNING
Read all safety warnings and instructions carefully before operating your grill.
PREPARATION FOR USE & LIGHTING INSTRUCTIONS
WARNING
OUTDOOR USE ONLY. DO NOT OPERATE GRILL INDOORS OR IN AN ENCLOSE SPACE
Never use grill indoors. Carbon Monoxide poisoning can lead to death.
Curing your grill
Step 1
Follow the instructions below carefully to build a fire. You may use charcoal and/or wood as fuel in the grill (see
“Adding Charcoal/Wood during Cooking” section of this manual).
WARNING
Use only a high grade plain charcoal or charcoal /wood mixture.
If using a Charcoal Chimney Starter, place lump or briquette charcoal on top of grate in chimney starter until full.
Underneath grate place balled up paper and light with match or lighter thru holes in bottom of chimney sides. Once
paper lights, fire will spread up thru charcoal until entire column is glowing red in the bottom with ash formation on
top. Pick up by handle and pour lit charcoal into grill.
(Proceed to Step 4)
NOTE: To extend the life of your grill, make sure that hot coals and wood do not touch the walls of grill.
Step 2
Follow manufacturer
’s instructions for lighting charcoal.
Содержание MAVERICK GR1031-014985
