K D M 4 0 1 a I N S T R U C T I O N M A N U A L
PA G E 1 1
AUDIO
Advanced Menu
Audio
Following the main Submenu flow charts (pages 6 and 7) enter the ‘Advanced Menu System’ .
Press the
OK button
to enter the Submenu .
Port Number:
1
Press the
OK button
to access port number adjustment mode . Use the or arrows to
select the port number, press the
OK button
to save .
NOTE:
Use the same steps in Audio for ports 2-4 .
Encoder Rate:
128K
Press the
OK button
to enter the encoder adjustment mode . Use the or arrows to set the
Encoder rate, press the
OK button
to save . (128K fixed) .
Are you sure?
y
When the ‘Audio’ has been set, there will be a confirmation on the display . Press or
arrows to select YES or NO . Select ‘
y
’ for yes, all the settings above will be stored in the
memory . Select ‘
n
’ for no to cancel . Press the
OK button
to confirm .
STREAM
Advanced Menu
Stream
Following the main Submenu flow charts (pages 6 and 7) enter the ‘Stream Set Service Name’
mode . Press the
OK button
to enter the Submenu .
Stream
Set Service Name
Service Name:
Custom
Press the
OK button
to enter the next page of the menu .
To access the ‘Custom’ or ‘Quick setup’ mode, press the
OK button.
For Quick setup mode
using pre-programmed channel names, refer to the included channel addendum .
Port Number:
1
Press the
OK button
to access port number adjustment mode . Use the or arrows to select
the port number, press the
OK button
to enter the next page to set the service name .
NOTE:
Use the same steps in Stream Set Service Name for ports 2-4 .
Service Name:
KINGRAY SD MOD
Press the
OK button
to enter the edit mode . Use the or arrows to edit the first character
of the Service Name . 0-9 and A-Z can be used up to 15 characters . Press the arrow to
advance to the next character and the or arrows to set . Press the
OK button
to save .
Are you sure?
y
When the ‘Stream Service Name’ has been set, there will be a confirmation on the display .
Press or arrows to select YES or NO . Select ‘
y
’ for yes, all the settings above will be stored
in the memory . Select ‘
n
’ for no to cancel . Press the
OK button
to confirm .
Video
Port Number: 1
Press the
OK button
to access port number adjustment mode . Use the or arrows to
select the port number, press the
OK button
to save .
Aspect ratio
4:3
y
Press the
OK button
to enter the edit mode . Use the or arrows to change the aspect
ratio from 4:3 to 16:9 .
Are you sure?
y
When the ‘Aspect Ratio’ has been set, there will be a confirmation on the display .
Press or arrows to select YES or NO . Select ‘
y’
for yes, all the settings above will be
stored in the memory . Select ‘
n’
for no to cancel . Press the
OK button
to confirm .
RETRIEVE VIDEO STATUS
Following the main Submenu flow charts (pages 6 and 7) enter the ‘Video Retrieve Status’ mode, you can check the parameters
of your previous settings in ‘Video’ .