HHO CARBON CLEANER 6.0 OPERATION MANUAL
15
Carbon cleaning will last until the time you set, HHO Carbon Cleaner 6.0 have the countdown
function, you can see the remaining the time from the panel.
In the process of carbon cleaning, you can look the working state of the machine, if appear water
adding tips, please don’t stop the machine immediately, after finishing carbon cleaning process, then
add water.If appear engine flameout, please process according to The Operation Introduction of
Engine Flameout.
Notice: If the machine appears power outage or other abnormal, should immediately stop
carbon cleaning.
The method to stop carbon cleaning: press OFF button, and close the Power Switch, let the car
work for 3 minutes on idle speed to discharge the remaining gas.
6.13-The countdown time is 00:00, the system will automatically cut off electrolytic power,
stop to produce oxy-hydrogen gas.
6.14-Continue to wait for 1 minute so that complete the transportation of the rest
oxy-hydrogen gas.
6.15- Let the engine flameout and connect the car vacuum tube with the vacuum pump,
ensure the connection is reliable and will not leakage.
6.16-Re-start the car engine.
6.17- Speed up to 3000-3500 rpm under idle running. Loosen the throttle and interval to
3 seconds. Repeat 6 times, you will see the discharge of the water and dirt out of exhaust
pipe.
6.18-Carbon cleaning is over.
7. Fault analysis and elimination
When the machine appears the bellowing faults, the corresponding indicator will turn on,
the worker should analysis the fault timely and eliminate it.
No
Fault phenomenon
Reason analysis
Elimination method
1
Working indicator is
not bright after
opening power switch.
The Power Switch has
damaged or power line is
not connected well.
a.Replace the Power Switch
b.Connect the power line well
