Kingfisher FPLM132H-6 Скачать руководство пользователя страница 5

Страница: 5 / 51

FPLM132H-6

Getting

started...

Technical and legal information

Ensure that the brake wire (3) can be smoothly

operated (i.e. is not catching or kinking in any way).

Operation

1. Do not operate the engine in a confined space where

dangerous carbon monoxide fumes can collect.

2. Mow only in daylight or in good artificial light.

3. Do not operate the product while being tired, ill or

under influence of alcohol or drugs.

4. Avoid operating the product in wet grass, where

feasible.

5. Always be sure of your footing on slopes.

6. Walk, never run.

7. Mow across the face of slopes, never up and down.

8. Exercise extreme caution when changing direction on

slopes.

9. Do not mow excessively steep slopes near drop-offs,

ditches or embankments.

10. Avoid using the product in bad weather conditions

especially when there is a risk of lightning.

11. Use extreme caution when reversing or pulling the

product towards you.

12. Stop the cutting device(s) if the product has to be tilted

for transportation when crossing surfaces other than

grass, and when transporting the product to and from

the area to be mowed.

13. Never operate the product with defective guards,

shields, or without safety devices, for example

deflectors and/or grass catchers, in place.

14. Do not change the engine governor settings or

overspeed the engine.

15. Do not alter or tamper with any sealed adjustments for

the engine speed control.

16. Do not tamper or disable any product’s safety systems

or features.

MNL_FPLMP99H-4_GB_V05_200911.indd 5

9/11/20 5:23 PM

Содержание FPLM132H-6




















































Результаты поиска

Содержание FPLM132H-6

Отзывы:

Бренды по названию

Популярные бренды

Kingfisher FPLM132H-6, Оригинальное руководство пользователя

Результаты поиска

Содержание FPLM132H-6

Отзывы:

Бренды по названию

Популярные бренды