manualshive.com logo in svg

Kingfisher FPLM132H-6, Оригинальное руководство пользователя

Поделиться
Скачать
Kingfisher FPLM132H-6 Скачать руководство пользователя страница 34

EN

34

EN

In 

more 

detail...

FPLM132H-6

Care and maintenance

The golden rules for care

WARNING! 

Proper maintenance is essential for safe and trouble free 

operation. Improper maintenance, or failure to address a problem 

instantly can cause a malfunction which can result in serious injury 

or even death.

WARNING! 

Always Stop the engine, disconnect the spark plug 

connector (15) and let the product cool down before performing 

inspection, maintenance and cleaning work! 

DO NOT touch a rotating blade (27).

1. Keep the product clean. Remove debris from it after each use and before

storage.

2. Regular and proper cleaning will help ensure safe use and prolong the life of

the product.

3. Inspect the product before each use for worn and damaged parts. Do not

operate it if you find broken and worn parts. Replace worn parts as necessary

or contact an authorised service centre for repair before using the product

again.

WARNING! 

Only perform repairs and maintenance work according 

to these instructions! All further works must be performed by a 

qualified specialist!

Cleaning

1. Clean the product with a slightly damp cloth and mild soap. Use a brush for

areas that are hard to reach.

2. In particular clean the air vents (9) after every use with a cloth and brush.

3. Remove stubborn dirt with high pressure air (max. 3 bar).

NOTE: 

Do not use chemical, alkaline, abrasive or other aggressive 

detergents or disinfectants to clean this product as they might be 

harmful to its surfaces.

Maintenance

Before and after each use, check the product and accessories (or attachments) 

for wear and damage. If required, exchange them for new ones as described in 

this instruction manual. Observe the technical requirements.

MNL_FPLMP99H-4_GB_V05_200911.indd   34

9/11/20   5:23 PM

Содержание FPLM132H-6




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды