ASSEMBLY and INSTALLATION continued...
7
32.
Find the bunji cord with the two
hooks attached.
Figure 32
33.
Fit the travel sock to the canopy and
fold it down flat to the boat.
34.
Clip one end of the cord to the sup-
plied loop on the canopy cover. Pull
the cord down to the chine rail with
appropriate amount of tension to
hold the canopy down but still allow
you to easily unhook the cord. Cut
the cord at this length.
35.
Now attach one of the hooks to this
end by first placing the collar onto
the cord and then putting the hook
over the cut end until it stops. Then
slide the collar over the hook until it
locks into place.
Figure 33
Repeat
for the other side.
36.
Finished sock and cord should look
like
Figure 34
Travel Sock Strap Instructions
Figure 32
Bunji cord
Figure 33
Bunji cord
Figure 34
Travel Sock
