Kingfisher 3663602423270 Скачать руководство пользователя

Страница: 8 / 46

FPLMP129

Getting

Started . . .

Emergency

Familiarise yourself with the use of this product by means of this instruction

manual. Memorise the safety directions and follow them to the letter. This will

help to prevent risks and hazards.

Always be alert when using this product, so that you can recognise and handle

risks early.

Fast intervention can prevent serious injury and damage to property.

Stop the engine and disconnect the spark plug connector if there are

malfunctions.

Have the product checked by a qualified professional and repaired,

if necessary, before you operate it again.

In case of fire stop the engine and disconnect the spark plug connector.

Take

fire-extinguishing measures immediately if the product switch is no longer accessible.

WARNING!

Never use water to extinguish the product on fire. Burning fuel must

be extinguished with special extinguishing agents! We recommend that you

keep a suitable fire extinguisher within reach in your work area! We recommend

to have dry powder fire extinguisher always available.

Residual risks

Even if you are operating this product in accordance with all the safety requirements,

potential risks of injury and damage remain. The following dangers can arise in

connection with the structure and design of this product:

1. Health defects resulting from vibration emission if the product is used over long

periods of time or not adequately managed and properly maintained.

2. Injuries and damage to property due to broken application tools or the sudden impact

of hidden objects during use.

3. Danger of injury and property damage caused by flying objects.

4. Burns, if touching hot surfaces.

WARNING!

This product produces an electromagnetic field during operation!

This field may under some circumstances interfere with active or passive

medical implants! To reduce the risk of serious or fatal injury, we recommend

persons with medical implants to consult their doctor and the medical implant

manufacturer before operating this product!

Symbols

On the product, the rating label and within these instructions you will find among others

the following symbols and abbreviations. Familiarise yourself with them to reduce hazards

like personal injuries and damage to property.
kW

Kilowatt

Millilitre

Cubic centimetre

g/kWh

Gram per kilowatt per hour

/min or min

-1

Per minute

kg/h

Kilogram per hour

Millimetre

°C

Degree Celsius

Centimetre

dB(A)

Decibel (A-rated)

Kilogram

m/s

Metres per second squared

Litre

mm.yyyy

Manufacturing date code; year of manufacturing (

yyyy

) and month of

manufacturing (

)

Description of signal words:

DANGER!

The signal word that indicates a hazard with a high level of risk

which, if not avoided, will result in death or serious injury.

WARNING!

The signal word that indicates a hazard with a medium level of

risk which, if not avoided, could result in death or serious injury.

CAUTION!

The signal word that indicates a hazard with a low level of risk

which, if not avoided, could result in minor or moderate injury.

NOTE!

Indicates a practical tip, advice or practice not related to personal

injury.

Lock/to tighten or secure.

Wear respiratory protection.

Unlock/to loosen.

Wear hearing protection.

Wear eye protection.

Note/Remark.

Wear protective gloves.

Caution/Warning.

Read the instruction manual.

Wear protective, slip-resistant

safety footwear.

Mow across the face of slopes,

never up and down.

Safety information

3663602423270-GB-V04.indd 8

27/9/2018 10:06

Содержание 3663602423270















































Результаты поиска

Содержание 3663602423270

Отзывы:

Похожие инструкции для 3663602423270

Бренды по названию

Популярные бренды

Kingfisher 3663602423270, Оригинальное руководство пользователя

Результаты поиска

Содержание 3663602423270

Отзывы:

Похожие инструкции для 3663602423270

Бренды по названию

Популярные бренды