Kingfisher 3663602423270 страница 32 Скачать руководство пользователя

Страница: 32 / 46

FPLMP129

detail

. . .

5. Mow in slightly overlapping rows. The most effective

pattern for mowing lawns is straight lines along one of

the sides. This keeps the rows even and ensures that

all the lawn is cut without missing any spots (Fig.

6. Circle around flower beds. When reaching a flower bed

in the middle of the lawn, cut a row or two around the

circumference of the bed.

7. Pay particular attention when changing direction.

8. Empty the grass catcher (

) regularly.

WARNING!

Extensive vibration of the product during operation is an indication

of damage! Stop the engine immediately. The product should be promptly

inspected and repaired!

After use

1. Stop the engine, disconnect the spark plug connector (

) and let the product cool.

2. Check, clean and store the product as described below.

The golden rules for care

DANGER!

Proper maintenance is essential for safe and trouble free operation.

Improper maintenance, or failure to address a problem instantly can cause a

malfunction which can result in serious injury or even death.

WARNING!

Stop the engine, disconnect the spark plug connector (

) and let

the product cool before performing inspection, maintenance and cleaning work!

Do not touch the rotating blade (

1. Keep the product clean. Remove debris after each use and before storage.

2. Regular and proper cleaning helps to ensure safe operation and prolongs the life

of the product.

3. Inspect the product before each use for worn and damaged parts. Do not operate

it if you find broken and worn parts. Replace worn parts as necessary or contact an

authorised service centre for repair before using the product again.

Operation/Care and maintenance

WARNING!

Only perform repairs and maintenance work according to these

instructions! All further works must be performed by a qualified specialist!

Cleaning

1. Clean the product with a slightly damp cloth and mild soap. Use a brush for areas

that are hard to reach.

2. In particular, clean the air vents (

) after every use with a cloth and brush.

3. Remove stubborn dirt with high pressure air (max.

bar).

NOTE:

Do not use chemical, alkaline, abrasive or other aggressive detergents

or disinfectants to clean this product as they might be harmful to its surfaces.

Maintenance

Before and after each use, check the product and accessories for wear and damage. If

required, exchange them for new ones as described in this instruction manual. Observe

the technical requirements.

WARNING!

It is required to tip the product when performing the maintenance.

The fuel tank (

) must be empty, or fuel can leak which could result in fire or

explosion.

NOTE:

Always empty the fuel tank (

) and keep the spark plug (

) upside

down. Otherwise, the fuel or engine oil might contaminate the air filter (

10a

spark plug (

) and might make it difficult start the engine.

3663602423270-GB-V04.indd 32

27/9/2018 10:06

Содержание 3663602423270















































Результаты поиска

Содержание 3663602423270

Отзывы:

Похожие инструкции для 3663602423270

Бренды по названию

Популярные бренды

Kingfisher 3663602423270, Оригинальное руководство пользователя

Результаты поиска

Содержание 3663602423270

Отзывы:

Похожие инструкции для 3663602423270

Бренды по названию

Популярные бренды