KING K 7005, Инструкция по эксплуатации, Страница: 7 / 20

■ It is the customer’s resposibility to make the electricity and water installations
conformant to the appliance.
■ The power connection of your electrical instant water heater mounted onto your
installation and its operation should be undertaken by Authorized Service.
■ Before the installation of your device, it is necessary to make electrical connection
between your device and electrical panel by using 32-A N-automatic fuse which is
given to the customer with the device. On the other hand for that kind of devices it is
suggested to use a secondary 32-A N-automatic fuse between neutral-end and
electrical panel. The secondary 32 – A N-automatic fuse is not in the package,
customers need to supply it by themselves.
■ In the case of any failures do not open the electrical instant water heater’s cover.
Call the nearest Authorized Service.
HOW TO USE THE INSTANT WATER HEATER
■ Before using your appliance check the power and water connections.
■
Switch on the input tap and wait for reservoir to be filled with water.
■ When water starts to drip it means that the reservoir has fully filled. You can now
adjust the step switches in accordance with the temperature you like.
■ Do not reduce the input water of your appliance too much.
■ When switching off the appliance, bring the water temperature selection switch to
the position ‘’0’’.
■ Wait until hot water is over.
■ When cold water starts to drip, switch off the tap. This process will help preventing
calcification.
CAUTION
Under normal conditions the discharge of your appliance is 3 liters per minute. It is
necessary therefore your water’s main water flow be adjusted so as the discharge
of the water issuing from your appliance be 3 liters per minute. Under these
circumstances, in your appliance ∆t shall be 3°C, which means that (at maximum
level) the cold water which enters your appliance at a temperature of 10°C will
re-issue with a temperature 40°C. The more water discharge increases, the more its
temperature decreases. Your obtaining the hot water you need in accordance with
seasonal variations you may regulate the discharge rate by either reducing or
increasing the incoming water.
MAINTENANCE OF THE INSTANT WATER HEATER
■ Maintenance of the electrical instant water heater should be made by Auhorized
Services.
■ Never allow unqualified persons to interfere with your device.
■ Before all maintenance processes, disconnect the power by switching off the N –
automatic switch.