KING K 7005, Инструкция по эксплуатации, Страница: 4 / 20

■ The hoses and pipes that are to be directly connected with the installation need to
sustain a working pressure of 6 bars.
■ Without a person who is responsible for the security of the devices and without
providing necessary conditions for surveillance and management of the device, it is
not intended to use that device by the people (including children) who is disabled
physically or mentally and who has lack of experiance and knowledge about that
product.
■ Children must be kept under supervision to be sure that they are not playing with
the device.
In order to deal all ports of trouble and breakdown and to provide spare parts
definetely apply to Authorized Service.
DEFINITIONS AND SPECIFICATIONS
7 SECURITY SYSTEMS
1. The resistance of your appliance is a covered tube resistance and so the
resistance wire never tuoches with water. Thanks to this feature, the current
electricity does not contact with the water and that prevents the electric shocks.
2. When the water flow is too low or there is no water, diaphragm switch cut off the
water heater’s power supply, if even your appliance is powered on.
3. When water is over heated, the thermostat which is within the heating reservoir
switches off to ensure absolute safety. If the water temperature comes to normal
degrees, it switches again.
4. When any blockage at the water discharge of the appliance becomes, the return
system switches off your appliance, in order to prevent the sudden increases of the
water temperature.
5. The security valve lying on the heating reservoir empties the over water flow and
thus prevents any damages of the user and the appliance.
6. Within the heating reservoir, where tube resistances were inserted, durably water
will become held and thus plastic accessories of the equipment are protected from
damaging of losses water until they becomes cool.
7. Against the fact that the user is not to leave the appliance open was powered on,
there is an indicator light in front of it.
STEP INDICATOR SWITCH
(WATER TEMPERATURE SELECTION SWITCH)
This switch allows you to turn on and off your
electrical instant water heater and to adjust your
hot water level. The appliance has three steps
including 3000 W, 4000 W, and 7000 W,
whichever one you may desire to choose
according to the water temperature.