KING K 7005, Инструкция по эксплуатации, Страница: 3 / 20

We thank you for having selected the KING Electrical Instant Water Heater. Your
appliance, an expedient product with a modern outlook, gives you instant hot water
and is easy to use.
In order to obtain the maximum efficiency from your appliance and to use it safely,
please read the following instructions carefully.
IMPORTANT SAFEGUARDS
■ To have your appliance that has a calorific power of 7000 W set up you will need
qualified electricians and plumbers to have your electicity and water installation
aranged accordingly.
■ It is the customer’s resposibility to have the electricity and water installation fixed
so as to conform the electrical instant water heater.
■ Authorized Service will only carry out the electrical connections between the
installation and the device, and perform the initial operation.
■ The electrical connection of your KING Electrical Instant Water Heater should be
grounded. The appliance should be no way be used in buildings that have no ground
connection, insufficient ground connection or grounding that no appropriate with
regulations. Otherwise, our company shall not be held resposable for any problems
that may ensure.
■ Your device is for household use only. Do not use outdoors for commercial or
industrial purposes. (such as coiffeur, worksite, small atelier where need constantly
warm water).
■ Your appliance should not be connected to main water supply of your home; it is
only connected in the bathroom or anywhere that proper for the authorized service.
■ At the first time operating your appliance, do not switch on the electrical citcuit
before having the tank (the water reservoir of the appliance) filled with water.
■ Do not install your appliance at places where the water is likely to freeze. If water
frozen do not operate the appliance.
■ Your electrical instant water heater should be connected to an automatic fuse of
at 40 amperes.
■ There will be differences in the input water temperatures according to the season-
al variations. You may obtain the water you need by arranging the water temperature
selection switch and water input quantity to suit your requirements.
■ While your electrical instant water heater is in use do not operate other devices
with over 1000 W power ( oven, iron, washing machine, dishwasher, etc.).
■ In the case of low water flow or water supply failure, the appliance’s power supply
is cut. When enough water flow is reached power supply is resumed.
■ You are recommended to have a pressure regulator installed on the cold water
input side of your electrical instant water heater, when using at such places with a
water pressure of 6 bars or more.