KING K 7005, Инструкция по эксплуатации, Страница: 6 / 20

CONNECTING THE ELECTRICAL INSTANT WATER HEATER TO THE
SHOWER ACCESSORIES
■ By using two spiral hoses supplied with your electrical instant water heater
connect the portable shower accessory to the electrical instant water heater, the ¾
‘’ extremity of the other spiral hose to the accessory, and its ½ ‘’ extremity to the
electrical instant water heater.
■ By using the rubber gaskets supplied with the accessory complete the couplings.
■ Never use any shower accessory of other appliance instead of this shower
accessory giving with your appliance.
ELECTRICAL LINKAGE
■ The working voltage range of your electrical instant water heater is 220 – 240
volts.
■ The power of your electrical instant water heater is 7000W. The internal
installation of the building ought to be arranged to conform a power of 7000W.
■ Grounding is absolutely necessary. The appliance should in no way be used in
buildings that have no ground connection, inadequate ground connection or the
ground connection is not convinient with rules. Otherwise, our company shall not be
held responsable for any problems that may ensure.
■ The distance and tension loss of the electricity between the electrical panel of your
entrance and the electrical instant water heater should be taken into account. A
cable whose cross – section is at least 4 mm2 40 amperes should be used. (Reduc-
tion factors are also to be taken into account.)
■ The electricity line of your appliance connected is distinct from the insurance
panel of your home and the automatic fuse should be at 40 amperes. There must
any plug, lamp or any other things in this line or if there is it must be cancelled. If it
is not possible to draw a direct line for the water heater, if the current line within the
building accordingly, a line which is on the next plug socket distributer (buat) is
pulled to the bathroom. In this case the other plug sockets connected with the
respective line are cancelled. The protection connected with this line should be at 40
amperes.
■ It is necessary to use the 3*4 mm2 of Antigron cabel if the current plant is not
appropriate and the installment which has a standart grounding must be connected
directly to the water.
■ If the main insurance vlue of your home is not enough, the main insurance should
be changed with new one which has proper value after calculation of the electrician.
■ Connection of ground and neotral line method which is called making zero, etc. İs
not acceptable for grounding and never connect to this type lines.