KING Clippo K 074, Инструкция по эксплуатации

Страница: 4 / 26

Never use the product to cut wet hair. It is designed to work in dry conditions only.
During use your clippers will become warm. To prevent overheating, only use
continuously for a maximum of 30 minutes at a time and allow to cool for 10 minutes
between cuts.
Before you begin:
1. Make sure that your Grooming Solutions Clipper is clean, properly oiled and in perfect
working condition.
2. Place a towel around the neck of the person to prevent hair from falling down inside
the collar.
3. Position the person whose hair is to be cut on a chair so that his/her head is at your
eye level.
4. Comb the hair to remove all tangles; hold the clipper in a relaxed comfortable grip.
This will help you to maintain an accurate cutting control.
Cutting hair with the attachment combs
(For medium to long styles)
1. To attach combs, hold with teeth facing up and snap comb attachment firmly to the
bottom of the clipper blade.
2. At first cut a small amount of hair until you become accustomed to the length that each
attachment comb leaves the hair.
3. Try the longest attachment comb on the clipper first, and then use a shorter one if
desired.
4. Never push or force the clipper through the hair at a fast rate. The clipper works most
efficiently when it works at it’s own speed.
5.
Start by combing the hair in its natural direction.
6. Place the attachment comb onto your clipper and start by trimming the sides from the
bottom upwards. Hold the clipper lightly against the hair with teeth of the attachment
comb pointing up but flat against the head. Slowly lift the clipper up and outward through
the hair, cutting only a small amount at a time
7.
Repeat around sides and back of head.
8. If you desire shorter hair, either change to a lower number attachment comb or apply
more pressure and less lift away from head with the present attachment comb.
9. This entire procedure requires practice, and it is always better to leave too much hair
the first few haircuts.
CARE AND MAINTENANCE
Should your Grooming Solutions Hair Clipper Set fail to operate please check that it is
being used in accordance with these instructions.
If after checking the above the product is found to be faulty and it is still within its
guarantee period,