16
FROG Leap Infuzer™ Two-Year Limited Warranty
King Technology, Inc. warrants to the original purchaser this unit
will be free from any defects in workmanship and/or material, for
a period of two (2) years from the date of original purchase. This
warranty covers body, cap and control dial, but specifically excludes
o-rings. King Technology at its option may replace any defective
parts or the entire unit without charge after it is determined
what is needed to correct any deficiency. Replacement parts
with the exception of o-rings are warranted for the remainder
of the original warranty. To extend the limited warranty from two
years to ten years, simply complete the warranty card that came
with your unit and return it to King Technology within 30 days of
purchase and installation.
1. To obtain warranty service, you must deliver the unit to King
Technology or its nearest authorized dealer. Shipping expenses
are the purchaser’s responsibility. The name of the nearest
authorized dealer can be obtained by writing or calling King
Technology at the address and telephone number provided
below. Proof of purchase is required when requesting warranty
service. Purchaser must present the sales receipt or other
documentation verifying proof of purchase.
2. This warranty does not cover defects caused by:
Modification, alteration, repair or service of the unit contrary
to the accompanying instructions; physical abuse to or misuse
of the product or operation or installation in a manner contrary
to the accompanying instructions. This warranty also excludes
all costs arising from the installation, adjustment, removal or
replacement of defective units or parts. This warranty also
excludes any and all claims arising out of the chemicals used
in the product or their characteristics.
3. CAUTION - Read carefully – Failure to follow these
instructions will void the warranty. Do not add shock in or
near skimmer.
A. This unit is not designed for shock treatment of pools.
See your pool dealer or distributor for further information
concerning shock treatments.
B. Control dial settings higher than needed can result in
excess sanitizers being discharged into the pool. If the
sanitizer level goes unmonitored, it can result in bleaching or
discoloration of areas around the pool inlet or in some cases
bleaching or discoloration of the entire pool liner or paint.
C. Excess trichlor in the pool can create health hazards to
bathers. Consult each chemical manufacturer’s warnings and
cautions for specifics.
D. Misuse or failure to use the proper FROG Leap Anti-Bac
Mineral Pac and FROG Leap Torpedo Pac may cause damage
to equipment or personal injury. This warranty will be null and
void, if this unit is not used with the recommended FROG
Leap Anti-Bac Mineral Pac and FROG Leap Torpedo Pac.
4. This warranty is the exclusive warranty for the FROG Leap
Infuzer. This warranty is not transferable.
KING TECHNOLOGY
MAKES NO REPRESENTATION OR WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, AS TO MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER
MATTER CONCERNING THE FROG LEAP INFUZER.
Any
express warranty not provided herein, and any remedy for
breach of contract but which for this provision might arise
by implication or operation of law is hereby excluded and
disclaimed. THE EXCLUSIVE REMEDY FOR ANY CUSTOMER
IS THE REPAIR OR REPLACEMENT OF THE UNIT, AND THE
RECOVERY OF DAMAGES WILL NOT EXCEED THE PURCHASE
PRICE OF THE UNIT. IN NO EVENT WILL KING TECHNOLOGY BE
LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL OR
PUNITIVE DAMAGES FROM ANY CAUSE.
5. Under no circumstance shall King Technology be liable to
purchaser or any other person for any damage or loss incurred
because of any chemicals used in the product or their physical
characteristics, or interruption of service of the product, or
any resulting special, incidental or consequential damages or
losses. Some states do not allow the exclusion or limitation of
incidental consequential damages, so the above limitation or
exclusion may not apply to you.
Manufactured by: KING TECHNOLOGY, INC.
530 11th Avenue South, Hopkins, MN 55343 U.S.A.
952-933-6118 • 800-222-0169 • FAX 952-933-2206
www.kingtechnology.com
Made in U.S.A.
U.S. Patents D540,906; D551,971; 6,190,547; 6,210,566;
6,217,892; 6,383,507; 6,544,415; 6,551,609; 6,652,871;
7,604,018 and other U.S. and Foreign patents pending.
20-48-2022
553101143N
