Page 26 of 57
King Pigeon Hi-Tech. Co., Ltd.
Ver 3.0
GSM/SMS/GPRS/3G/4G
Cellular IoT M2M RTU
Input Type:
The user can choose the input type for related channel. Includes: Disable, 0~5V, 0~20mA,
4~20mA.
1) Disabled:
Not use this channel.
2) 0~5V:
For connecting transducers that output voltage 0~5V. Please remember to switch
the related channel DIP switch to V side, see
DIP Switch Definitions
.
3) 0~20mA:
For connecting transducers that output current 0~20mA, Please remember to
switch the related channel DIP switch to A side, see
DIP Switch Definitions
.
4) 4~20mA
: For connecting For connecting transducers that output current 0~20mA, Please
remember to switch the related channel DIP switch to A side, see
DIP Switch Definitions
.
5) Temperature and Humidity:
Enable/Disable support. Only accept AMS230x series sensor,
the temperature maximum is 80, minimum is -40, and Humidity maximum is 100,
minimum is 0, cannot change them.
High Alarm SMS:
Under Arm or 24h status, once current value higher than threshold high value will
send this SMS content to authorized numbers.
Low Alarm SMS:
Under Arm or 24h status, once current value lower than threshold low value will
send this SMS content to authorized numbers.
Recovery SMS:
Under Arm or 24h status, if tick the "Recovery Alarm", when current value recovery
normal will send this SMS content to authorize number.
Maximum:
The transducer’s maximum measure range. E.g.:100 Celsius degree. Usually it can
be found out at the transducer’s specification.
Minimum:
The transducer’s minimum measure range. E.g : -50 Celsius degree. Usually it can
be found out at the transducer’s specification.
