King Pigeon S270 Скачать руководство пользователя

Страница: 11 / 57

Page 11 of 57

King Pigeon Hi-Tech. Co., Ltd.

Ver 3.0

GSM/SMS/GPRS/3G/4G

Cellular IoT M2M RTU

transmission.

Alarm

Alarm Indicator, alarm will ON and flick. Normally is OFF;

Arm

Arm/Disarmed Indicator, Arm is ON, disarmed is OFF.

Run

RTU running status indicator, ON or OFF stands for RTU halted, flicks slowly stands for

RTU running.

5.3 Interface Definition

Backside Switch & Button Definition

SIM Card Slot

For SIM Card Installation, only supports 1.8V/3V SIM Card

Power Switch

For switch ON or OFF the RTU

Upgrade

Firmware Switch

For upgrade firmware purpose only. Only when upgrade new firmware version will use it,
otherwise keep it at Work Side all the time.

Power Connector Definition

DC IN+

External DC Power input port, Connect to 1.5A@9~36V DC power, positive electrode.

DC IN-

External DC Power Input port, contact to negative electrode

DC Out+

Power source output port, positive electrode. Provides power from RTU to external

transducers or sensors or detectors. The output current should less than the power from
DC IN inputs. If adapter current is 2A, then suggest external transducer current to be less
than 1.5A

DC Out -

Power source output port, Negative electrode.

DIP Switch Definition

SET/RUN

For setting the RTU Mode is in Configuration Mode or Run mode.
Switch it to upside is Set Mode, under this mode, the user can use PC Configurator via

USB cable to configure the RTU Parameters or Read Parameter settings.
Switch it to Downside is Run Mode, under this mode, the RTU is in Running mode.

Tips:

When device mode changed, need to switch off/on the device.

0/V/mA

The 1

channel of analog input type switch. If not use this channel then no matter is

upside or downside.

Switch it to upside stands for the 1

analog input should connect to 0~5V voltage output

Содержание S270


























































Результаты поиска

Содержание S270

Отзывы:

Похожие инструкции для S270

Бренды по названию

Популярные бренды

King Pigeon S270, Руководство пользователя

Результаты поиска

Содержание S270

Отзывы:

Похожие инструкции для S270

Бренды по названию

Популярные бренды