AsseMbly
unPAckIng
Carefully remove all components and hardware bags from the carton.
1. Secure each wheel (A) Fig.1 to each corner of the base (B) using 4 flange
head hex. bolts for each wheel.
2. Install the left column (C) Fig.1 and right column (D) to the base (B) using
4 round allen head bolts and washers for each column. Notice the
placement of the columns as shown in Fig.1.
3. Install the cross brace (E) Fig.1 to both columns as shown, using 6 flange
head hex. bolts.
4. Install the drum lid supports (F) Fig.1 to the base (B) using 2 flange head
hex. bolts each support. Notice the placement of the drum lid supports as
shown in Fig.1.
5. Install the drum lid handle assembly (A) Fig.2 to the drum lid supports (B).
Secure each side of the handle with the plastic washers placed in between
the parts. Insert the top section (A) Fig.3 of the handle onto the upper
threaded shaft. Secure the top section using the nylon hex. nut (B). Secure
the pivoting bracket (C) to the lower threaded shaft. Secure the pivoting
bracket using the nylon hex. nut (D).
FIgure 1
FIgure 2
FIgure 3